The difference between fiber polyester fiber bundle and polypropylene fiber bundle filter material: fiber bundle material is polypropylene fiber and polyester fiber. Polyester fiber bundle is made by artificially tying polyester fiber. Polypropylene fiber bundle is made of polypropylene fiber. The material is different, the polypropylene fiber can only be used for tying the fiber bundle, and the fiber bundle filter material is made of polymer fiber bundle as the filter material, and the diameter of the monofilament can be several tens of micrometers to several micrometers, belonging to the micrometer filter material (the sand filter belongs to It has a large specific surface area and greatly improves the retention and adsorption capacity of particles in water. The removal rate of suspended solids in water can be close to 100%. When the water is well coagulated and the suspended matter content is 20 mg/L, the suspended solids can be filtered up to 1 mg/L or less. The advantages of the fiber bundle filter material have obvious removal effects on impurities such as bacteria, viruses, macromolecular organic matters, colloids and iron.
The removal rate of suspended solids with a particle size greater than 5 um is 90-95%. The problem that the filtration precision of the granular filter material is limited by the particle size of the filter material is solved. It is a new generation of granular filter equipment such as quartz sand. The mechanical adjustment device can quickly adjust the bulk density of the bundle filter according to the effluent quality and filtration rate requirements. The high-efficiency fiber bundle has light texture, high strength, good elasticity, abrasion resistance, corrosion resistance and no water absorption. There are many advantages in the water treatment process. Fiber bundle filter materials are widely used in high-standard water, recycling, side filtration, and wastewater recycling in power, oil, chemical, metallurgical, and electronics industries.
Please indicate the source.
